,

Solar Panel Aluminum Water Dust Drain Clips

Сайт Aluminum Water and Dust Drain Clip is a device that is plugged to the solar module to prevent the accumulation of dust and soiling. Ideal for preventing the dirt pattern that gets stuck in the solar panel frame, It is suitable for 30mm; 33mm; 35 mm; 40mm thickness solar panel.

When it rains, due to the slight projection of the edge of the panels, the stagnant water is not drained away in time, and the mud in the stagnant water precipitates to soiling the edges or the corners of the modules. The accumulation of dirt in the panels edge or in the corners, can have dramatic consequences on the proper functioning of the photovoltaic system, it reduces photovoltaic panel power generation, and will form hot spots effect, reducing the service life of panels.

Our solar PV panels Aluminum Water Dust Drain Clips are a self-fastening clip, made of Aluminum. The length is about 60 mm, weight 7.8 grams, and the width is based on the thickness of the panels aluminum alloy frame. Clasped the water clip to the bottom edge of the PV panel,the stagnant water will flows away, there is no fouling again.

The Aluminum Water Dust Drain Clips clamp is used to guide water and mud above the solar panel and clean dust and sand on the surface. The installation method is simple. You only need to clamp the clip on the frame of the panel to fix it.

Features of Aluminum Water Dust Drain Clips:

Material – Made from high-quality aluminum (often anodized for extra corrosion resistance).

  1. Quick installation, just snap it onto the frame of the module, no additional accessories and tools are required, it can be kept in the best installation position continuously, and it is stable and does not shift
  2. Patented anti-blocking design, more efficient water diversion and mud discharge, 8 anti-blocking holes are added, not afraid of large dusts such as catkins, and dust accumulation belts can be removed while avoiding blockage
  3. One-time installation, lifelong use. Made of aluminum alloy, it is light and thin, energy-saving and environmentally friendly, and resistant to high and low temperatures and corrosion. It can be used outdoors for a long time for more than 30 years
  4. It can reduce costs and increase efficiency, with low cost and high efficiency, and can reduce the number of cleaning times of the power station throughout the year.
  5. One-time investment and long-term benefits. It can increase the power generation of the power station by 5%~10% per year when used alone. When used with the photovoltaic spray cleaning system, the power generation of the power station can be increased by more than 18%, and worry-free operation and maintenance can be easily achieved
  6. Reduces the risk of micro-cracks caused by prolonged moisture exposure.

The Aluminum Water Dust Drain Clips is a device that is plugged to the solar module to prevent the accumulation of dust and soiling. Ideal for preventing the dirt pattern that gets stuck in the solar panel frame, It is suitable for 30mm; 33mm; 35 mm; 40mm thickness solar panel.

Упаковка Подробности: Картонная коробка + фанерный поддон/стальной поддон

Порт: Порт Сямынь, Китай

Время доставки: 7-15 рабочих дней после получения вашей оплаты

Выше стандартные упаковка и доставка, мы также можем поддерживать настройки

Алюминиевый крепеж для солнечных батарей
Алюминиевый крепеж для солнечных батарей
упаковка поддона для солнечного монтажа
упаковка поддона для солнечного монтажа
Упаковка и доставка солнечных конструкций
Упаковка и доставка солнечных конструкций

Есть 2 цеха - алюминиевый и стальной.

Мастерская - Алюминий Материал:
SENYANG имеет профессиональный цех по обработке изделий из алюминиевых сплавов, резка, сверление, штамповка, ковка и другие работы выполняются самостоятельно.
Профессиональная производственная команда может принимать продукцию с высокими требованиями к настройке/точности.

Мастерская-Сталь Материал:

SENYANG имеет профессиональный цех по обработке стали/магния/алюминия/цинка/S350GD/S450GD, а также 6 производственных линий и несколько формовочных машин. В соответствии с различными проектами, он может завершить резку и обработку отверстий, с производительностью 40-50MW в месяц.

Алюминиевая солнечная структура Анодирование
Алюминиевая солнечная структура Анодирование
Алюминиевый завод по производству солнечных батарей
Алюминиевый завод по производству солнечных батарей
Производство солнечных монтажных конструкций
Производство солнечных монтажных конструкций
обработка солнечных конструкций
обработка солнечных конструкций
производство солнечных конструкций
производство солнечных конструкций
солнечные конструкции Мастерские
солнечные конструкции Мастерские
ошибка: Содержание защищено!!!